|
Bessel Motorsports Inc.
" THE COMPLETE IN
HOUSE MACHINE SHOP "
Hourly Shop Rate: $95.00/hr |
Last updated 3-30-06
700 FIRST CAPITOL DRIVE ST.CHARLES, MO
63301 Tel (636) 946-4747 Fax (636) 946-5757 |
- BLOCK WORK -
All work done on CNC Machine
center and Rottler Diamond Hone center
CODE LETTERS |
DESCRIPTION |
PRICE |
| |
|
|
BBP |
BASIC BLOCK PREP CONSISTING OF:
Clean and Inspection of block
Magnaflux Block
Check Line Bore
Block run through Steel Abrator
Re-Clean and check block again
Sonic Check Cylinder walls
Install In CNC machine
Probe and Blue-print block (If possible)
Bore and Deck Block
Clearance for Stroker Kit (If need)
Diamond Hone block
Install Cam-bearings (does not include price
of bearings)
Install freeze plugs (does not include price
of freeze plugs)
Re-clean and wrap block up and wait for pick-up
|
$475.00 - V6 - V8
$375.00 - 4 cylinders |
RRP |
RACE READ PREP CONSISTING OF:
Everything in the Basic Prep Plus:
Block Blue - printed on bore location
Diamond honed with torque plates
Line Bored
Clearanced for stroker kit
|
$775.00 |
CBP |
Competition Block Prep consisting of:
Everything in the basic prep and race prep
plus:
Custom BESSEL
splayed caps installed (Three center caps only) Does not include
ARP Hardware
Square deck to exact dimension plus or minus .0002"
|
$1175.00 |
LBB |
LINE BORE BLOCK |
Starting at $200.00 |
| DB |
DECK BLOCK |
V8 $150.00 4
CYLINDERS $100.00 |
| BB |
BOIL BLOCK AND MAGNAFLUX |
$50.00 |
| ICB |
INSTALL CAM BEARINGS |
$45.00 |
| CLB |
CHECK LINE BORE |
$40.00 |
| HC |
HONE CYLINDERS (BALL HONE) |
$4.00 PER CYLINDER |
| ORB |
O' RING BLOCK |
$150.00 - V8 (MAY BE ADDED
TO BLOCK PREP CALL FOR PRICE) |
| ICS |
INSTALL CYLINDER SLEEVE |
$125.00 PLUS COST OF SLEEVE |
| DHB |
DRILL HEAD BOLTS (1/2') IN BLOCK |
$75.00 |
| DIS |
DIS ASSEMBLE BLOCK |
$75.00 (STARTING QUOTE CALL
FOR DETAILS) |
| ILB |
INSTALL LIFTER BUSHINGS |
$500.00 (CALL FOR
DETAILS) |
| IRCB |
INSTALL ROLLER CAM BUSHINGS |
$600.00 (CALL FOR DETAILS) |
| NB |
NOTCH BLOCK FOR STROKER KIT |
$75.00 |
| PCB |
PRESSURE CHECK BLOCK |
$100.00 |
| RRH |
RIDGE REAM HONE CYLINDER |
$6.50 PER CYLINDER |
| SAC |
STEEL ABRATOR CLEANING |
$50.00 |
| SWB |
SPRAY WASH BLOCK |
$15.00 |
| SBA |
SHORT BLOCK ASSEMBLIES CONSISTING OF: Degree
camshaft in and file fitting rings |
$400.00 (Starting price
call for details) |
| TPM |
TORQUE PLATE MOTOR |
$150.00 (CALL FOR DETAILS
& CHECK ON PLATE AVAILABILITY) |
*All prices on this site are subject to change
without notice. Allied Motors disclaims responsibility for any printing or typographical
errors, and does not guarantee that all information is accurate. Thank You for using WWW.STROKERKITS.COM
- CYLINDER HEAD WORK -
ALL
VALVE JOBS ARE THREE ANGLE
*Aluminum
Cylinder Heads Valve jobs Do NOT include pressure checks or mill. Additional charge on setting Disk
clearance on disk heads.
Magnaflux is for cast iron -
Pressure checking is the only way to check Aluminum heads
CODE LETTERS |
DESCRIPTION |
PRICE |
| |
|
|
| 12 VALVE 4 CYL |
12 VALVE 4 CYLINDER VALVE JOB |
$225.00 |
| 16 VALVE 4CYL DOHC |
16 VALVE 4CYL DOHC VALVE JOB |
$280.00 |
| 4CYL |
4 CYLINDER 8 VALVE - VALVE JOB |
$200.00 |
| IG |
INSTALL CAST GUIDES OR BRONZE |
$9.00 PER GUIDE (INCLUDES
PRICE OF SOME GUIDES CALL FOR DETAILS) |
| CC |
CC CYLINDER HEADS |
$50.00
PER SET |
| CGS |
CUT GUIDES FOR SEALS |
$30.00 - V8 SET |
| CVS |
CHANGE VALVE SEALS |
$30.00 PER SET |
| DOHC V6 |
DOHC V6 VALVE JOB |
$280.00 PER HEAD |
| IS |
INSTALL HARDEN SEATS |
$17.50 PER SEAT (INCLUDES
SEAT) |
| MAG 4 |
MAGNAFLUX 4CYL HEAD |
$25.00 |
| MAG 6 |
MAGNAFLUX STRAIGHT 6 HEADS |
$35.00 |
| MAG V6 & V8 |
MAGNAFLUX V6 - V8 HEADS |
$50.00 FOR SET |
| MIL |
MILL 4 CYLINDER HEADS |
$50.00 (CALL FOR PRICE IF
MORE THEN .010" TO BE CUT) |
| MIL6-8 |
MILL 6 & 8 CYLINDER HEADS |
$50.00 PER HEAD (CALL FOR
PRICE IF MORE THEN .010" TO BE CUT) |
| OSP |
OPEN SEAT POCKETS |
$75.00 |
| ORH |
O' RING HEAD |
$50.00 PER HEAD |
| PC |
PRESSURE CHECK HEAD |
$50.00 PER HEAD |
| ISIS |
INSTALL SCREW IN STUDS |
$150.00 PER SET PRICE FOR
LABOR ONLY - NO HARDWARE |
| SSP |
SET SPRING PRESSURE |
$50.00 - V8 SET |
| STR6 |
STRAIGHT 6 VALVE JOB |
$300.00 |
| V6 |
VALVE JOB V6 CAST HEADS |
$300.00 |
| V8 |
VALVE JOB V8 |
$350.00 V8 SET |
*All prices on this site are subject to change
without notice. Allied Motors disclaims responsibility for any printing or typographical
errors, and does not guarantee that all information is accurate. Thank You for using WWW.STROKERKITS.COM
- Crankshaft Work -
CODE LETTERS |
DESCRIPTION |
PRICE |
| |
|
|
| GCS |
GRIND CRANKSHAFT / CHAMFER |
$140.00 ALL 4CYL -V6 -V8 |
| PCS |
MICRO POLISH / CHAMFER |
$40.00 |
| CGS |
CLEAN CRANKSHAFT & MAGNAFLUX |
$35.00 |
| CCS |
CHECK CRANK FOR STRAIGHTNESS |
$15.00 / $20.00 |
| SPC |
SHOT PEEN CRANKSHAFT |
$75.00 |
| OSG |
OFF SET GRIND |
$195.00 |
| DTS |
DRILL / TAP SNOUT |
$45.00 |
| SGS |
STRAIGHTEN CRANKSHAFT |
$15.00 / $20.00 |
| CK |
CUT 1/4 KEY IN CRANK |
$55.00 |
| LC |
LATHE CUT |
$95.00 |
*All prices on this site are subject to change
without notice. Allied Motors disclaims responsibility for any printing or typographical
errors, and does not guarantee that all information is accurate. Thank You for using WWW.STROKERKITS.COM
- Connecting Rod Work -
CODE LETTERS |
DESCRIPTION |
PRICE |
| |
|
|
| SP4 |
SHOT PEEN 4 CYLINDER RODS |
$40.00 |
| SP6 |
SHOT PEEN 6 CYLINDER RODS |
$45.00 |
| SP8 |
SHOT PEEN 8 CYLINDER RODS |
$55.00 |
| SPI |
SHOT PEEN INDIVIDUAL
RODS |
$15.50 |
| FCP |
FLY CUT PISTONS |
$75.00 FOR INTAKE CUTS $75.00 FOR EXHAUST CUTS PER SET -
ADDITIONAL $25.00 FOR ANGLED VALVE HEADS |
| HT |
HEAT TREAT RODS |
$80.00 SET |
| PP |
PRESS PISTONS ON AND OFF |
$72.00 A SET |
| PPI |
PRESS INDIVIDUAL PISTON |
$10.00 |
| PPO |
PRESS PISTONS OFF ONLY |
$36.00 |
| MAG |
MAGNAFLUX AND CLEAN RODS |
$25.00 SET |
| RR |
RECONDITION RODS |
$17.50 PER ROD |
| BPE |
BUSH BIG END OF RODS |
$17.50 PER ROD |
| CR |
CHECK RODS FOR ROUNDNESS |
$4.00 PER ROD |
| HR |
HONE ROD |
$4.00 PER ROD |
| OPP |
OPEN PISTON PIN |
$6.00 PER ROD |
| OCR |
OPEN TIGHT CONNECTING ROD |
$10.00 PER ROD |
*All prices on this site are subject to change
without notice. Allied Motors disclaims responsibility for any printing or typographical
errors, and does not guarantee that all information is accurate. Thank You for using WWW.STROKERKITS.COM
- Miscellaneous Work -
CODE LETTERS |
DESCRIPTION |
PRICE |
| |
|
|
| BP |
BASKET OF PARTS FOR CLEANING |
$40.00 |
| CM |
CLEAN MANIFOLDS |
$25.00 |
| DTG |
DRILL / TAP OIL GALLEYS |
$65.00 |
| BFP |
BRASS FREEZE PLUGS |
$14.95 |
| HC |
HELI COIL |
$17.50 |
| RBB |
REMOVE BROKEN BOLTS |
$10.00 |
| SFP |
STD FREEZE PLUGS |
$4.95 |
*All prices on this site are subject to change
without notice. Allied Motors disclaims responsibility for any printing or typographical
errors, and does not guarantee that all information is accurate. Thank You for using WWW.STROKERKITS.COM
- Balancing Work -
*Some jobs may need to have Tungsten (Heavy Metal) installed
CODE LETTERS |
DESCRIPTION |
PRICE |
| |
|
|
| BAL |
BALANCE JOB |
$250.00 V8 - $225.00 -
4CYL |
| FWB |
FLYWHEEL BALANCING |
$50.00 |
| IHM |
INSTALL HEAVY METAL |
$60.00 FIRST PIECE $45.00 THERE AFTER -PLUS PRICE OF METAL- |
*All prices on this site are subject to change
without notice. Allied Motors disclaims responsibility for any printing or typographical
errors, and does not guarantee that all information is accurate. Thank You for using WWW.STROKERKITS.COM
- Flywheel Work -
CODE LETTERS |
DESCRIPTION |
PRICE |
| |
|
|
| GFW |
GRIND FLYWHEEL |
$35.00 |
| GFW2 |
GRIND FLYWHEEL WITH 2 STEPS |
$38.00 |
| RP |
REMOVE & INSTALL PINS |
$2.00 PER PIN |
| FFG |
FLIP FLYWHEEL GEAR OR INSTALL NEW GEAR |
$25.00 |
All
prices on this site are subject to change without notice. Allied Motors disclaims
responsibility for any printing or typographical errors, and does not guarantee that all
information is accurate. Thank You for using WWW.STROKERKITS.COM
Please
feel free to contact us, with your needs or any other machine shop question at alliedmo@swbell.net or
636-946-4747
Thank you!
| 
Bessel
Motorsports
