 RM-1001 - SBL Lifter
Tray Assembly
 | Increases horsepower by shielding intake manifold from hot oil |
| Keeps surplus oil out |
| Keeps lifters in place |
RM-210 - Motor Pull Plate (4 hole)
| Fits Ford or Chevy 4-barrel intakes |
| Powder coated for corrosion protection |
| 4 5/16- 18 x 3/4" bolts and washers included |
RM-211 - Motor Pull Plate
| Fits any manufacturer's intake-2 or 4 barrel |
| 4 tapped holes for holding mounting bolts when not in use |
| 4 5/16- 18 x 3/4" bolts and washers included |
| Powder coated for corrosion protection |
RM-212 - Universal Ford Pull Plate - NEW!
| Fits lower base of Ford 5.0 and 5.8 small block fuel injected intake manifolds |
| Also fits any manufacturers 2 or 4 barrel intakes |
| Includes 4 tapped holes to store bolds when not in use (bolts included!) |
| Powder coated for corrosion protection |
RM-320 - SBL Lightweight Mid Mounts
| Mounts between engine and transmission |
| Notched for starter clearance |
| Powder coated for corrosion protection |
| Lightest steel mid mount available |
RM-330 - SBC Motor Mounts (Front)
| Powder coated for corrosion protection |
| Lightest steel motor mount available |
RM-6000 - 3" Break Floater Assembly (Right)
| Lightest brake floater available |
| Made from quality H-60 steel |
| Threaded inserts |
| Zinc plated |
RM-6001 - 3" Break Floater Assembly (Left)
| Lightest brake floater available |
| Made from quality H-60 steel |
| Threaded inserts |
| Zinc plated |
RM-6005 - Universal Bird Cage
| Lightest Bird Cage available anywhere |
| Built from high grade H-60 steel |
| 4 Bar, swing arm, Z-link, floated spring bracket (spring bracket bolt kit sold
separately: RM-6006) |
| Universal left or right |
| 2 - 4/3" to 5/8" reducer bushings included |
RM-6006 - Floated Spring Bracket Bolt Kit
| For use with RM-6005 Bird Cage when using a floating spring |
| Zinc plated |
RM-710 - SBC 48-Piece Block Off Assembly
| Quality zinc plated steel block off plates |
| Plastic plugs for all holes |
| All washer head mounting bolts |
| Everything you need to seal an SBC engine for storage or transport |
RM-712 - Ford 48-Piece Block Off Assembly (302/351)
| Quality zinc plated steel block off plates |
| Plastic plugs for all holes |
| All washer head mounting bolts |
| Everything you need to seal a Ford engine for storage or transport |
RM-1030 - Automatic Bump Start
| This is a top of the Line Bump Start for Power Glide Transmissions |
| Includes Bleeder valve, #4 aluminum fitting, 3 cap screws, and O-Ring |
RM-1040 - Lightweight 350 Crankshaft
| Reground cast steel approx 47 lbs |
| Approx 7lbs savings off rotating assembly |
| Faster acceleration, quicker braking, more RPM's |
| Ground at less than 20/20 |
| Bearings included |
RM-420 - Metric GM Spindle Saver (Right)
| Fits GM metric spindles |
| Made from lightweight H-60 steel |
| Strengthens spindle arm |
| Bolts on easily |
| Pays for itself over and over |
| Zinc plated |
RM-421 - Metric GM Spindle Saver (Left)
| Fits GM metric spindles |
| Made from lightweight H-60 steel |
| Strengthens spindle arm |
| Bolts on easily |
| Pays for itself over and over |
| Zinc plated |
RM-422 - 1 Pair Spindle Savers - Packaged
| 1 RM-420, 1 RM-421 |
RM-425 - Pinto Bump Steer Spacers
| 2.130 Length for Bump Steer Spacing when using Pinto spindles and metric front ends |
| Superior crush proof design made from H-60 Grade Steel |
| Zinc plated |
RM-426R - Pinto-metric Caliper - Gramada Rotor Adapter (Right)
| Adapts metric caliper to Pinto Spindle |
| Zinc plated |
RM-426L - Pinto-metric Caliper - Gramada Rotor Adapter (Left)
| Adapts metric caliper to Pinto Spindle |
| Zinc plated |
RM-430 - GM Metric Spindle Gauge
| Checks for bent spindle arms |
| Checks for bent spindle yokes |
| Made from quality H-60 steel |
| Zinc plated |
| adjustable |
RM-650 - Upper Ball Joint Collar 10° Left
| 5/8" threads with 3/8 bolt holes |
| Zinc plated |
| Made from high grade steel |
| Tig welded |
RM-651 - Upper Ball Joint Collar 10° Right
| 5/8" threads with 3/8 bolt holes |
| Zinc plated |
| Made from high grade steel |
| Tig welded |
RM-652 - Upper Ball Joint Collar Straight Left
| 5/8" threads with 3/8 bolt holes |
| Zinc plated |
| Made from high grade steel |
| Tig welded |
RM-653 - Upper Ball Joint Collar Straight Right
| 5/8" threads with 3/8 bolt holes |
| Zinc plated |
| Made from high grade steel |
| Tig welded |
RM-654 - Upper Ball Joint Clevis
| 5/8" threads with 3/8 bolt holes |
| Zinc plated |
| Made from high grade steel |
| Tig welded |
RM-655 Large Upper Ball joint Collar - NEW!
| Larger/Longer Chrysler type screw-in ball joint improves a-arm pitch/roll center |
| 5/8" threads with 3/8" bolt hole |
| Zinc plated |
| Made from high grade steel |
| Universal left or right |
| Tig welded |
RM-603 - Rear-end Spring Cup Perch
| Lightest spring cup perch available |
| Made from quality H-60 steel |
| Can be welded or clamped to 3" housing% |
RM-604 - Rear-end Spring Cup Perch (offset)
| Made from quality steel |
| IMCA legal |
| Can be welded or clamped |
| Made for Maximum forward bite. This bracket will launch you off the corner. |
| Zinc plated |
RM-600 - 5 ½ swivel spring cup - NEW!
| Made from quality H-60 steel |
| Lightest spring cup |
| 4 5/16- 18 x 3/4" bolts and washers included |
| Powder coated for corrosion protection |
RM-601 - Spring Cup
| Made from quality H-60 steel |
| Lightest spring cup on the market |
| Engineered for durability |
| Powder coated for corrosion protection |
| Use with 5" or 5 1/2" springs |
| up to 1" weight jack bolts/ 2 1/2" tall |
RM-602 - Spring Cup (Long)
| Powder coated for corrosion protection |
| Use with 5" or 5 1/2" springs |
| Made from quality H-60 steel |
| Engineered for durability |
| Up to 1" weight jack bolts/ 3 1/2" tall |
RM-602L - Spring Cup (Long/Long center)
| up to 1" weight jack bolts / 3 1/2" tall |
| 3 1/2" long center pipe |
| A must for 4 link cars |
| Powder coated for corrosion protection |
| Use with 5" or 5 1/2" springs |
| Made from quality H-60 steel |
| Engineered for durability |
RM-605 - Spring Cup Swivel
| 3 1/2" tall swivel spring cup |
| Eliminate coil bind |
| Lightest and most durable swing cup available |
| Bolts sold separately |
| Zinc plated |
RM-605 - 5½" Spring Cup - NEW!
| Built to fit snug in a 5½ spring cup |
| Made from quality H60 grade steel |
| Up to 1" weight jack bolts - 2½ tall |
| Powder coated for corrosion protection |
|
Bessel
Motorsports
