BBC
BBCFree Shipping (Continental United States only)

AFR – Airflow Research 3570 – AFR Big Block Chevy 357cc Rectangle Port Magnum Aluminum Cylinder Heads

AFR – Airflow Research# 3570

357cc Rectangle Port 24° Magnum Aluminum Cylinder Heads

  • BB-Chevy
  • 121cc Combustion Chambers
  • Bare Head Only
  • Sold in Pairs, 2/pkg.

SKU: 3570. Categories: , .

Product Description

AFR – Airflow Research 3570 – AFR Big Block Chevy 357cc Rectangle Port Magnum Aluminum Cylinder Heads Details

This is an unassembled bare cylinder head with valve guides and valve seats installed only. Does not include any parts such as valves, springs, spring components, studs or guideplates.

Big Block Chevy 357cc Rectangle Port 24° Magnum Basic Package Components

100% CNC Ported Combustion Chambers
100% CNC Ported Exhaust Ports
100% CNC Ported Intake Ports
Competition 5-Angle Valve Job
Intake Valve Size – 2.300” (Valve not included)
Exhaust Valve Size – 1.880” (Valve not included)
Intake Valve Seats
Exhaust Valve Seats
Bronze Valve Guides
Big Block Chevy 357cc Rectangle Port 24° Magnum Head Specifications
Head Torque w/Moly Lube 75 Ft. Lbs.
Rocker Stud Torque 55 Ft. Lbs.
Intake Port Gasket, 1.775” x 2.500” with 1/2” radius Fel-Pro 1275 – DO NOT PORT MATCH Intake Manifold to Fel-Pro Gasket.
Exhaust Port Gasket AFR 6858
Head Gasket Mark IV 4.540” Bore, Fel Pro 1017
AFR 6850
Head Gasket Mark V – VI Up to 4.500” Bore, Fel Pro 1047
Head Gasket Mark V – VI 4.500” to 4.600” Bore, Fel Pro 17049
Head Bolts & Studs Standard ARP
Head Bolt Washers Manley Standard
Stud Girdle AFR 6210
Suggested Manifold Edelbrock 2907 & 2927 or Brodix HV2000 & HV2001
Spark Plug Starting Range Champion C59C, Autolite 3932
Combustion Chambers 121cc Fully CNC’d
Intake Port Volume 357cc Fully Ported
Exhaust Port Volume N/A
Spring Pocket can be cut to 1.750, no deeper.
Valve Spacing Standard
Rocker Arms Standard
Valve Angle 24° / 4° Intake ; 15° / 4° Exhaust
Angle Mill, 104cc Maximum .009” per cc
Flat Mill, As Cast 108cc, CNC 114cc Maximum .006” per cc
NOTE: Flat and Angle mills might require a .120” thick head gasket.